Flash Nokia C3

Nokia C3-01 RM-640 flash file/firmware free download.

Nokia C3 Android smartphone. Announced Aug 2020. Features 5.99″ display, Unisoc SC9863A chipset, 3040 mAh battery, 32 GB storage, 3 GB RAM. Before flashing the firmware on your Nokia 8600 RM-164 V4.04 device you will need to take backup of your important data. If you flash your phone you will lose all of your data and your mobile will be restored in its original settings. This zipped firmware file or flash file contain VPL, DCP, MCU, PPM, CNT and with good PM file.

The latest original firmware/Software of Nokia C3-01 has bee released recently and it is free for all of you.
The download link is available so you can download it freely or without any cost. The firmware file is used to provide update or flash the mobile phones. If your mobile phone works slowly or shows notification message called ” Your Phone is Out of Date or Need Software Update” then you will need the firmware file or flash file to solve these problems. You can repair your phone’s corrupted or damaged firmware by your mobile phone.
If you flash your mobile phone with its own firmware, your mobile phone will restore its original settings in.
So flash your mobile phone as soon as possible if you notice any type of firmware problems.

Some of the Nokia C3-01 firmware problems are given below.
Problems:

01. The mobile phone works or performs slowly.
02. The mobile phone can be hanged.
03. You can lose some options of your mobile phone.
05. You can notice option but it will not work.
06. Some options show like hide & seek.
07. Your mobile phone can be restart again and again.

This Firmware Version Here- ↓

RM-640+v07.51

Several reasons for firmware problem or charging ways problem.

01. If you disassemble your battery without switching your phone off, it can happen firmware problem.
02. If you launch multiple options at the same time, it can corrupt flash or firmware file.
03. If you use backdated firmware without updating the latest firmware, you can face this problem.
04. Firmware can happen when you use your phone after showing the low battery.

The solution of firmware problems or flashing guide.

If you want to flash your mobile phone, you have to follow the instructions step by step that is given below.

01. Download the firmware or flash file of your mobile phone.
02. Keep it in a specific folder of a safe computer drive.
03. Never download firmware or flash file on the Desktop (C Drive).
04. Install the latest version setup of your flashing tool or flashing box device.
05. Install USB driver for your mobile phone.
05. Check your flashing tool activities before connect your mobile phone.
06. Keep backup or backup data of your mobile phone if u can.
07. Connect your phone and flash it completely.
08. Don’t disconnect your phone until complete flash.

Flash Samsung C3262

Remove the lock code by flashing the device in NOKIA C3-01 Touch and Type

If you have forgotten the security password (also known as a lock code) for your NOKIA C3-01 Touch and Type and there is no other way to perform the hard reset you should try uploading a new firmware by performing the flash operation on your cell phone. That way you will restore the default password but also lose all data on your device and bring all settings to the factory state.

In the following tutorial, we present step by step on how to perform such an operation. Please be aware of the consequences and risks that may result from this process.

To accomplish successfully the whole operation you should perform the followings steps:

Download Nokia’s firmware

How to install the Nokia Care Suite.

First of all, download the Nokia Care Suite on your PC. You can find it here: Nokia_Care_Suite
Afterwards, extract the package with the application.
Open the Nokia Care Suite folder and click on the installer application. In my case, this file is named Nokia Care Suite PST 5.0 2013.13.4.4.
Follow the standard installation process by selecting Next and accepting the terms in the license agreement.
Make sure that you chose the Complete setup type.
Start the building in a process by selecting Install option.
As soon as the information about successfully completed installation appears on the screen choose Finish.
Afterwards, copy from Nokia Care Suite directory and replace the usergroupsconfiguration.cfg file to: C:Program Files (x86)NokiaNokia Care SuiteProduct Support Tool For Store 5.0 if you’re running a 64-bit version of Windows C:Program FilesNokiaNokia Care SuiteProduct Support Tool For Store 5.0 if you’re running a 32-bit version of Windows.
Excellent! The Nokia Suite has just been installed.

How to read the product code

Method 1:

In the first step connect your phone to the PC. Make sure that the device is turned on and choose PC Suite or Ovi Suite.
Then open the Nokia BEST application and wait until your phone is properly detected.
In the top menu open the Service Tool section.
Finally, choose the Read Info operation and find the information about the Product Code on the black screen.

Method 2:

First of all, remove the back cover and the battery.
Afterwards, find the information about the device’s Product Code which should figure as a Code: XXXXXXX

Important Tip:

If you need to download a different firmware version for the NOKIA C3-01 Touch and Type, you should look for the appropriate code in the section Product Codes. You can choose here the firmware that suits to your needs the best by choosing, for example cellular network, country or navigation options.

How to download Nokia’s firmware

All needed firmware can download from

How to flash your device

Start by downloading the Nokia BEST application on your PC. You may find it here: Nokia_ BEST_simlock_pl.exe
In the next step extract the package with the application.
Turn on your device and connect it to your PC using the Micro USB cable. When your computer detects the new device, select the PC Suite or OVI Suite on your phone.
Afterwards, open the Nokia BEST folder and double click on the Start BEST icon.
Then from the top menu open Settings section, choose DataPackage path and check the address to folder which should contain the firmware files.
Open the folder from the checked path and in that place paste the folder with the phone’s software. The folder should be named by RM-XXX.
Next, in the Nokia BEST interface go to Flashing menu and make sure that the files load automatically to the empty brackets.
Make sure that you have selected the following options Use INI, Backup, Chk/Read, Set Normal and FactorySet.
In order to start the whole operation click on the Flash icon.
Well done! After a while, the flash should be completed. Your phone will erase all data and settings and your lock code will come back to standard one.

What can go wrong

If the Nokia BEST does not automatically load the firmware files in the empty brackets you can do two things:
- Reload the path to the folder with phone’s firmware by selecting Settings, choosing a DataPackage path and tapping Change active dir. When the window with available options appears to choose the same path as it was before.
- In Flashing section choose a manual option for a few seconds.
- Afterwards go back to Use INI option and the files should load in the empty brackets.
If the Nokia BEST disconnects your device while flashing the device and you are asked to connect the phone, on the selected interface do the following sequence:
- Replace the battery from your phone for a moment.
- Disconnect your phone from the computer.
- Turn on the phone by holding the power button.
- Connect your phone to the computer and choose PC Suite or Ovi Suite.
- Click on the Flash icon and the operation will be continuing
If your phone while flashing switches on and does not want to turn back on, do the following steps:
- Disconnect and connect your phone to the computer into PC Suite or Ovi Suite.
- In the flashing section choose Dead Mode and click on FLASH.
- If the Nokia BEST asks you to press the power button on your phone, do it immediately.

Remove the lock code by flashing the device in {{brand}} {{model}}

Rating: 4.7 - 3 reviews